- Home
- Tube Laser Cutting Machine
- FLT-6016LN Pipe Laser Cutting Machine
FLT-6016LN Pipe Laser Cutting Machine
There are few machines on the market that can compete with the H3 Heavy Duty Horizontal Three Chucks Tube Laser Cutting Machine when it comes to speed, precision, and durability. This machine is designed for heavy duty cutting applications and can handle even the most challenging projects. With its three chucks, this machine can cut tubes up to 12″ in diameter with ease. The laser cutting head is also able to produce clean, precise cuts on both round and square tubing.
Technical Parameters
| Maximum cutting length | ≤6000mm |
| Maximum weight for each tube | 150kg |
| Cutting diameter | 15-160mm |
| Rotary speed | 100rpm |
| X.Y.Z axis position accuracy | ±0.05mm/m |
| Minimum tailing | ≥90mm |
| Maximum running speed | 60m/min |
| Power supply | 380V/50Hz |
Components
Feature
The main use and scope of application of the product
Mainly used for ordinary carbon steel pipe, stainless steel pipe, aluminum alloy pipe, copper pipe cutting and processing. Cutting workpiece size: round pipe Φ20mm-φ160mm, square pipe side length ≤110mm, rectangular pipe profile diagonal ≤160mm, L ≤6500mm.
Automatic feeding size: round pipe: Φ30mm-Φ130mm; square pipe: side length 25mm-80mm, pocket feeding method, the rest of the pipe does not support automatic feeding; single pipe weight ≤ 70kg. flush length: 5900mm ≤ workpiece ≤ 6100mm.
The main components of the product
FLT-6016LN series fiber optic pipe cutting machine main components are: machine tool host, feeding device, control system, laser, water cooler, fan, etc.
Main machine part
The main part of the machine is the main component of the fiber optic pipe cutting machine, fiber optic pipe cutting machine cutting function and cutting accuracy are achieved by the main part of the machine, the main part of the bed and the front chuck, rear chuck, beam and x-axis device, z-axis device, laser head, reducer wheel bracket device and positive clamping device (the whole machine a total of 3 groups of bracket material, including the head and tail 2 groups with positive clamping jaws), auxiliary systems (lubrication, air and water), electronic control cabinet, operation screen, operation panel and other parts. (lubrication, air and water circuit), electric control cabinet, operation screen, operation panel and other parts.
Feeding device
The feeding device is mainly composed of pocket material frame, material belt, pocket material motor, material frame, material lifting motor, material lifting frame, guiding frame, temporary storage blocking cylinder, material feeding frame, etc. When the photoelectric switch detects that there is a steel pipe rolled to the material frame, the material motor reverses to prevent too many steel pipes from rolling to the material frame, the material lifting frame will lift one pipe at a time, the lifted pipe will rise to a certain height and roll along the feeding ramp to the position of the temporary storage blocking cylinder, when the main machine finishes cutting one pipe, the rear chuck returns to zero position. When the main machine finishes cutting a tube, the rear chuck returns to zero position, the staging cylinder drops and the tube rolls into the arc of the feeding ramp.
After the workpiece rolls into the arc of feeding ramp, the flush cylinder extends the flush material, and the material holding mechanism lifts the workpiece to the center of front and rear chuck, the rear chuck clamps the workpiece, the rear chuck advances to feed the workpiece into the front chuck, the front chuck clamps the workpiece and starts cutting.
Electrical control part
Fiber optic pipe cutting machine electrical control system is an important part of ensuring the operation of various graphics trajectory, the general electrical control system is mainly composed of CNC system and low-voltage electrical system.
The machine tool CNC system configuration high-performance CNC system, the system is based on windows operating platform, stable and reliable operation, containing 32-bit microprocessor; the system has a fast interpolation operation speed, easy to operate, good dynamic performance, strong load capacity and other characteristics.
Low-voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor for driving the machine tool X axis, Y axis, Z axis, characterized by good acceleration performance, fast response speed, Y axis maximum positioning speed of up to 60m/min; machine tool Z axis for the feed axis, using AC servo motor (with holding brake) drive: that is, Z axis cutting head, characterized by good dynamic response characteristics, both with the control and NC control.
Auxiliary peripheral equipment
Including water chiller, exhaust system, etc.
Bed part
The bed is made of welded pipe, the inner part is steel pipe, the outer part is made of 3mm steel plate, annealed after welding to eliminate internal stress and then machined, which greatly improves the rigidity and stability of the machine and ensures the accuracy of the machine.
The Y-axis rack and linear guide are made of high precision products, which effectively ensure the accuracy of the transmission; the limit switch control at both ends of the stroke and the hard limit device are equipped, which effectively ensure the safety of the machine movement; the main machine is equipped with automatic lubrication device, which adds lubricant to the moving parts of the bed at regular and quantitative intervals. The main machine is equipped with automatic lubrication device, which can add lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts run in good condition, which can improve the service life of guide rails, gears and rack.
Crossbeam and X-axis and Z-axis devices
The crossbeam is annealed to eliminate internal stress, rough machining, vibration aging and then finishing to ensure the rigidity and stability of the moving parts of the laser head. x-axis and z-axis are driven by high precision modules, in the process of movement, the limit switch controls the travel to limit, and at the same time there are elastic cushion mechanical limit at both ends to ensure the safety of the system operation.
Z-axis device is mainly to achieve the up and down movement of the laser head. The up and down movement of the laser head is controlled by the CNC system servo motor, which drives the linear module to drive the Z-axis slide plate up and down reciprocating motion to complete. The upper and lower ends are controlled by proximity switches to ensure the safety and reliability of the movement.
Electrical control system
The electrical control system of FLT-6016LN series fiber optic pipe cutting machine is mainly composed of Pachu CNC system, servo system and low voltage electrical system. The laser cutting machine is equipped with high performance Pachu CNC system, which is a WINDOWS-based PC CNC system with fast interpolation and easy operation; the servo system is an imported AC servo motor and driver, which is stable and reliable, with good dynamic performance, strong load carrying capacity and easy operation. The machine operation soft keys can have different functions in different operation modes, thus reducing the operation buttons and simplifying the operation panel. The operation functions are displayed by menus in various ways, making the operation intuitive.
cutting effect
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.
